machine specifications
polymer :
LDPE, LLDPE, Tie, Virgin Raw Material
Micron Range :
20 to 200
lay flat range :
1800mm - 2500mm
output :
450 - 600 Kg/Hr (Depends On Extruder's Size)
full specifications :
Model Name : BETAFLEX 5 Layer Co-Extrusion Blown Film Line |
Final Product : LL / LLDPE |
Material Used : LDPE, LLDPE, Tie, Virgin Raw Material |
Output Range : 450 - 600 kg/hr (Depends on Extruder's Size) |
Film Layer : Five Layer (Internal Bubble Cooling System) |
Screw Diameter : 55 / 65 / 75 / 90 MM |
Screw L/D : 30:1 |
Layflat Width : 1800 - 2500 MM |
Micron Thickness : 20 - 200 |
Non barrier five layers film comes from a strong market demand for sustainable specialty films with reduced thickness, good sealing and optical properties. The five-layer technology for Polyolefin Dedicated Film (POD) enables production economies and quality enhancement. Polyolefins are a family of polymers produced from a simple olefin (also called an alkene) as a monomer. The two most common classes are PolyEthylene (PE) and PolyPropylene (PP). Polyolefins are used in a wide range of Medical Applications including Dilators, Introducers, Packaging, Film and Molded Components. They generally offer good Biocompatibility, Chemical Resistance and Lubricity while offering acceptable tensile and impact properties. However, care needs to be taken when evaluating the sterilization of the materials as they have limited temperature and radiation resistance.
Non barrier five layers film comes from a strong market demand for sustainable specialty films with reduced thickness, good sealing and optical properties. The five-layer technology for Polyolefin Dedicated Film (POD) enables production economies and quality enhancement. Polyolefins are a family of polymers produced from a simple olefin (also called an alkene) as a monomer. The two most common classes are PolyEthylene (PE) and PolyPropylene (PP). Polyolefins are used in a wide range of Medical Applications including Dilators, Introducers, Packaging, Film and Molded Components. They generally offer good Biocompatibility, Chemical Resistance and Lubricity while offering acceptable tensile and impact properties. However, care needs to be taken when evaluating the sterilization of the materials as they have limited temperature and radiation resistance.
The Lowest Wetted Surface Area compared to all dies in industry
Shortest Flow Grooves
No restriction on # of spirals
30% to 50% less melt volume
Individual internal heat zones
Only 10 parts for Five Layer
Much faster heating & cooling
Easy to assemble & disassemble